Händlersuche
Búsqueda de distribuidores
Quick links
ULTIMATECUT
Consejos de aplicación
Explicaciones del producto
Products
Metalworking
Productfinder
Ámbitos de aplicación
Datos técnicos
Single-cut tap M ≈ 352 HSS ground
ULTIMATECUT step drill HSS RUnaTEC with FLOWSTEP® tip
ULTIMATECUT step drill bit set HSS RUnaTEC with FLOWSTEP® tip
ULTIMATECUT step drill HSS RUnaTEC with FLOWSTEP® tip
ULTIMATECUT step drill bit set HSS RUnaTEC with FLOWSTEP® tip
ULTIMATECUT twist drill DIN 338 Typ FLOWSTEP® HSS
ULTIMATECUT step drill HSS RUnaTEC with FLOWSTEP® tip
ULTIMATECUT Taper and deburring countersinker 4S HSS DIN 355 90°
Countersinks for the highest demands in structural steel or steels up to 900 N/mm²
Single-cut tap set HSS
Tungsten carbide hole saw, shallow cut
Screw-hole punches with three-point cutting tip
Suitable for sheet steel, stainless-steel sheets, non-ferrous and light metals, plastics. Ideal for switchgear manufacturers, electricians, plumbers, industry and handicrafts.
ULTIMATECUT Twist Drill Set DIN 338 Type FLOWSTEP® Point, HSS
ULTIMATECUT step drill bit set HSS RUnaTEC with FLOWSTEP® tip
ULTIMATECUT Taper and deburring countersinker set 4S HSS DIN 335 90°
Countersink set for highest demands in structural steel or steels up to 900 N/mm²
Hand tap set HSS
Tungsten carbide hole saw, shallow cut
Set of screw-hole punches in plastic cases
Hand tap set M 352 HSSE-Co 5
ULTIMATECUT twist drill DIN 338 Typ FLOWSTEP® HSSE-Co 5
ULTIMATECUT step drill set with FLOWSTEP® tip HSS size no. 0/9, 1, 2 in REPACK by RUKO
ULTIMATECUT Taper and deburring countersinker 4S HSS RUnaTEC DIN 355 90°
Countersink for the highest demands in stainless steel or steels up to 1,300 N/mm² for longer tool life
Hand tap set HSS
Tungsten carbide multigrade hole saw MHS
Screw-hole punches with three-point cutting tip + ball bearing
Suitable for sheet steel, stainless-steel sheets, non-ferrous and light metals, plastics. Ideal for switchgear manufacturers, electricians, plumbers, industry and handicrafts.
ULTIMATECUT Twist Drill Set DIN 338 Type FLOWSTEP® Point, HSSE-Co 5
ULTIMATECUT step drill HSS RUnaTEC with FLOWSTEP® tip
ULTIMATECUT Taper and deburring countersinker set 4S HSS RUnaTEC DIN 335 90°
Countersink set for highest demands in structural steel or steels up to 900 N/mm² for longer tool life or stainless steels
Hand tap set HSS
Bi-metal hole saw set HSS with varied toothing
Set of screw-hole punches with ball-bearing in plastic cases
ULTIMATECUT Countersink 4S HSSE-Co 5 DIN 355 90°
Countersink for highest demands in Hardox steels, stainless steel and steels up to 1,100 N/mm²
ULTIMATECUT Countersink set 4S HSSE-Co 5 DIN 335 90°
Countersink set for highest demands in Hardox steels, stainless steel and steels up to 1,100 N/mm²
ULTIMATECUT Countersink 4S HSS-Co 5 RUnaTEC DIN 355 90°
Countersink for the highest demands in stainless steel or steels up to 1,300 N/mm² for longer tool life
ULTIMATECUT Countersink set 4S HSSE-Co 5 RUnaTEC DIN 335 90°
Countersink set for highest demands in stainless steel or steels up to 1,300 N/mm² for longer tool life
Twist drill DIN 338 type UNI, HSSE-Co 5
ULTIMATECUT step drill bit set HSS RUnaTEC with FLOWSTEP® tip
ULTIMATECUT Taper and deburring countersinker DIN 335 type C 90° HSS
Countersink for high demands in structural steel or steels up to 900 N/mm²
Bi-metal hole saw HSS with varied toothing
Set of foot-operated hydraulic punch in plastic case
Twist drill set DIN 338 type UNI, HSSE-Co 5
ULTIMATECUT step drill set with FLOWSTEP® tip HSS size no. 0/9, 1, 2 in REPACK by RUKO
ULTIMATECUT Taper and deburring countersinker set (DIN 335) type C 90° HSS in plastic case
Countersink set for high demands in structural steel or steels up to 900 N/mm²
Set of bi-metal hole saws HSS in plastic cases
Set of manual hydraulic punch in plastic case
Twist drill DIN 338 type N, HSS-G
ULTIMATECUT Multidrill HSS RUnaTEC, spiral fluted with turbo tip
ULTIMATECUT Taper and deburring countersinker DIN 335 type C 90° HSS RUnaTEC
Countersink for high demands in stainless steel or steels up to 1,100 N/mm²
Bi-metal hole saw HSSE-Co 8 with fine toothing
Distance sleeve
Twist drill set DIN 338 type N, HSS-G
ULTIMATECUT multidrill set HSS RUnaTEC in plastic case
ULTIMATECUT Taper and deburring countersinker set (DIN 335) type C 90° HSS RUnaTEC in plastic case
Countersink set for high demands in stainless steel or steels up to 1,100 N/mm²
Set of bi-metal hole saws HSSE-Co 8 in plastic cases
Adapter bolt MF 10 x 1,0, 3/4" UNF fitting
ULTIMATECUT Taper and deburring countersinker DIN 335 type C 90° HSSE-Co 5
Countersinks for high demands in structural steel or steels up to 900 N/mm² for longer tool life or stainless steels
Arbor holder including pilot drill
Replacement bolt MF 8 x 1,0 x 40
ULTIMATECUT Taper and deburring countersinker set (DIN 335) type C 90° HSSE-Co 5 in plastic case
Countersink set for high demands in structural steel or steels up to 900 N/mm² for longer tool life or stainless steels
Pilot drill HSSE-Co 5
Replacement bolt with ball-bearing MF 10 x 1,0 x 50
Twist drill DIN 338 type VA, HSSE-Co 5 TiAlN
ULTIMATECUT Taper and deburring countersinker DIN 335 type C 90° HSSE-Co 5 RUnaTEC
Countersink for high demands in stainless steel or steels up to 1,300 N/mm² for longer tool life
Arbor holders for tungsten carbide multigrade hole saws
Twist drill set DIN 338 type VA, HSSE-Co 5 TiAlN
ULTIMATECUT Taper and deburring countersinker set (DIN 335) type C 90° HSSE-Co 5 RUnaTEC in plastic case
Countersink set for high demands in stainless steel or steels up to 1,300 N/mm² for longer tool life
Arbor holders including pilot drill for bi-metal hole saws
Twist drills DIN 338 type VA HSSE-Co 8
Twist drill set DIN 338 type VA, HSSE-Co 8
Twist drills DIN 338 type VA, HSSE-Co8 TiAlN
Twist drill set DIN 338 type VA, HSSE-Co 8 TiAlN
Twist drill DIN 338 type VA, HSSE-Co 5
Twist drill set DIN 338 type VA, HSSE-Co 5
Twist drill DIN 338 type VA, HSSE-Co 5 in fractional sizes
Twist drill set DIN 338 type VA, HSSE-Co 5 in inch dimensions
Twist drill DIN 338 TL 3000, HSS-G
Twist drill set DIN 338 TL 3000, HSS-G
Twist drill DIN 338 TL 3000, HSS-G TiAlN
Twist drill set DIN 338 TL 3000, HSS-G TiAlN
Twist drill DIN 338 TL 3000, HSS-G in fractional sizes
Twist drill set DIN 338 TL 3000, HSS-G in inch sizes
Twist drill DIN 338 TL 3000, HSS-G TiAlN in fractional sizes
Twist drill set DIN 338 TL 3000, HSS-G TiAlN in inch dimensions
Twist drill DIN 338 TL 3000, HSS-G TiN
Twist drill set DIN 338 TL 3000, HSS-G TiN
Twist drill DIN 338 TL 3000, HSS-G TiN in fractional sizes
Twist drill set DIN 338 TL 3000, HSS-G TiN in inch dimensions
Twist drill DIN 338 type N, HSS-G in fractional sizes
Twist drill set DIN 338 type N, HSS-G in inch sizes
Twist drill DIN 338 type N, HSS-G TiN
Twist drill set DIN 338 type N, HSS-G TiN
Twist drill DIN 338 type N, HSS-G TiN in fractional sizes
Twist drill set DIN 338 type N, HSS-G TiN in inch dimensions
Twist drill DIN 338 type N, HSS-G with TiN-coated tips
Twist drill set DIN 338 type N, HSS-G with TiN-coated tips
Twist drill DIN 338 type N, HSS-G - left hand cutting
Twist drill set DIN 338 type N, HSS-G - left hand cutting
Twist drill DIN 338 type N, HSS rolled
Twist drill set DIN 338 type N, HSS rolled
Twist drill DIN 338 type N, HSS rolled with reduced shank
Twist drill DIN 338 type N, HSS-G with reduced shank
Twist drill set DIN 338 type N, HSS with reduced shank in magazine
Twist drill DIN 338 type N, HSSE-Co 5 with reduced shank
Twist drill DIN 340 type N, HSS-G
Twist drill DIN 340 type N, HSS-G TiN
Twist drill DIN 1869 TL 3000, HSS-G - extra long
Twist drill DIN 345 type N, HSS
Twist drill DIN 345 type N, HSSE-Co 5
Twist drill DIN 345 type N, HSSE-Co 5 TiN
Twist drill DIN 1897 type N, HSS-G - short
Twist drill DIN 1897 type N, HSS-G TiN - short
Twist drill DIN 1897 type N, HSSE-Co 5 - short
Twist drill DIN 1897 type N, HSSE-Co 5 TiAlN - short
Centre drills DIN 333, HSS ground - shape A
Double end drills type KV, HSS ground
Twist drill DIN 338 UTL 3000, HSSE-Co 5
Twist drill set DIN 338 UTL 3000, HSSE-Co 5
Twist drill DIN 338 UTL 3000, HSSE-Co 5 in fractional sizes
Twist drill set DIN 338 UTL 3000, HSSE-Co 5 in inch sizes
Twist drill DIN 338 UTL 3000, HSSE-Co 5 TiAlN
Twist drill sets DIN 338 UTL 3000, HSSE-Co 5 TiAlN
Solid TC twist drills DIN 338 type N, TiAlN
Twist drill DIN 338 type N, with brazed-on TC cutting inserts
Twist drill set DIN 338 type N, with brazed-on TC cutting inserts
Twist drill DIN 338 type N, with brazed-on TC cutting inserts, Tecrona
Twist drill set DIN 338 type N, with brazed-on TC cutting inserts, Tecrona
Centre drills DIN 333, HSS ground - shape A with reinforcing bead
Centre drills DIN 333, HSS ground - shape R
Twist drill DIN 340 TL 3000, HSSE-Co 5
Twist drill DIN 340 TL 3000, HSSE-Co 5 TiAlN
Spot drills type N, HSS ground - extra short
Spot weld miller HSS
Spot weld miller set HSS
Weld point drill Fast Cut HSSE-Co 5
Weld point drill Fast Cut HSSE-Co 5 TiCN
Weld point drill Fast Cut Tungsten-carbide AlTiN
Milling Drill HSS
Milling Drill HSS-TiN
Weld point drill Spotle Drill HSSE-Co 5
Weld point drill Spotle Drill HSSE-Co 5 TiCN
Tube and sheet drill HSS, CBN ground with split point
Tube and sheet drill set HSS
Tube and sheet drill HSS-TiN, CBN ground with split point
Tube and sheet drill set HSS-TiN
Tube and sheet drill HSSE-Co 5, CBN ground with split point
Tube and sheet drill set HSSE-Co 5
Tube and sheet drill bit HSS, 1/4", CBN ground with split point
Tube and sheet drills HSS with stopper and spot facer for cavity sealing, CBN ground with split point
Step drill HSS, spiral fluted with split point
Step drill set HSS spiral fluted
Step drill set HSS spiral fluted, sizes 0/9, 1, 2 in REPACK by RUKO - 3 pcs
Step drill HSS, fractional sizes, spiral fluted with split point
Step drill HSS-TiN, spiral fluted with split point
Step drill set HSS-TiN spiral fluted
Step drill set HSS-TiN spiral fluted, sizes 0/9, 1, 2 in REPACK by RUKO - 3 pcs
Step drill HSS-TiN, fractional sizes, spiral fluted with split point
Step drill HSS-TiAlN, spiral fluted with split point
Step drill set HSS-TiAlN spiral fluted
Step drill set HSS-TiAlN spiral fluted, sizes 0/9, 1, 2 in REPACK by RUKO - 3 pcs
Step drill HSS-TiAlN, fractional sizes, spiral fluted with split point
Step drill HSSE-Co 5, spiral fluted with split point
Step drill set HSSE-Co 5 spiral fluted
Step drill set HSSE-Co 5 spiral fluted, sizes 0/9, 1, 2 in REPACK by RUKO - 3 pcs
Step drill HSSE-Co 5, fractional sizes, spiral fluted with split point
ULTIMATECUT step drill set with FLOWSTEP® tip HSS size no. 0/9, 1, 2 in REPACK by RUKO
ULTIMATECUT step drill set with FLOWSTEP® tip HSS size no. 0/9, 1, 2 in REPACK by RUKO
Crash barrier step drill HSS-TiAlN spiral fluted with split point
Step drill bit HSS, spiral fluted with split point
Step drill bit HSS-TiN, spiral fluted with split point
Step drill HSS, CBN ground,spiral fluted with split point, short design
Step drills HSS, CBN ground with 3 cutting edges
Step drill set HSS, with 3 cutting edges
Step drills HSS, CBN ground with 3 cutting edges
Step drill set HSS, with 3 cutting edges
Step drills HSS, spiral fluted with split point for metric cable connections
Step drills HSS-TiN, spiral fluted with split point for metric cable connections
Step drills HSS-TiAlN, spiral fluted with split point for metric cable connections
Step drills HSS without point
ULTIMATECUT Taper and deburring countersinker set DIN 335 90° HSS in REPACK by RUKO - 6 pcs.
ULTIMATECUT Countersink set DIN 335 90° HSS in REPACK by RUKO - 6 pcs.
ULTIMATECUT Taper and deburring countersinker set DIN 335 90° HSS RUnaTEC in REPACK by RUKO - 6 pcs.
ULTIMATECUT Countersinker set DIN 335 90° HSSE-Co 5 RUnaTEC in REPACK by RUKO - 6 pcs.
ULTIMATECUT Taper and deburring countersinker set (DIN 335) type C 90° HSS in REPACK by RUKO - 6 pcs.
Countersink set for high demands in structural steel or steels up to 900 N/mm²
ULTIMATECUT Taper and deburring countersinker set DIN 335 type C 90° HSS RUnaTEC in REPACK by RUKO - 6 pcs.
Countersink set for high demands in stainless steel or steels up to 1,100 N/mm²
ULTIMATECUT Taper and deburring countersinker set DIN 335 type C 90° HSSE-Co 5 in REPACK by RUKO - 6 pcs.
Countersink set for high demands in structural steel or steels up to 900 N/mm² for longer tool life or stainless steels
ULTIMATECUT Taper and deburring countersinker set (DIN 335) type C 90° HSSE-Co 5 RUnaTEC in REPACK by RUKO - 6 pcs.
Countersink set for high demands in stainless steel or steels up to 1,300 N/mm² for longer tool life
Taper and deburring countersinkers DIN 335 type C 90° HSS
Countersink entry-level model for structural steel or steels up to 900 N/mm²
Taper and deburring countersinker set DIN 335 type C 90° HSS
Countersink set entry-level model for structural steel or steels up to 900 N/mm²
Taper and deburring countersinker set DIN 335 type C 90° HSS in REPACK by RUKO - 6 pcs.
Countersink set entry-level model for structural steel or steels up to 900 N/mm²
Taper and deburring countersinkers DIN 335 type C 90° HSS - for aluminium
Countersink for aluminium and plastics
Taper and deburring countersinker set DIN 335 type C 90° HSS for aluminium
Countersink set for aluminium and plastics
Taper and deburring countersinkers DIN 335 type C 90° HSS-TiN
Countersink entry-level model for structural steel or steels up to 900 N/mm² for longer tool life
Taper and deburring countersinker set DIN 335 type C 90° HSS-TiN
Countersink set entry-level model for structural steel or steels up to 900 N/mm² for longer tool life
Taper and deburring countersinker set DIN 335 type C 90° HSS-TiN in REPACK by RUKO - 6 pcs.
Countersink set entry-level model for structural steel or steels up to 900 N/mm² for longer tool life
Taper and deburring countersinkers DIN 335 type C 90° HSS-TiAlN
Countersink entry-level model for structural steel or steels up to 1,100 N/mm² for longer tool life
Taper and deburring countersinker set DIN 335 type C 90° HSS-TiAlN
Countersink set entry-level model for structural steel or steels up to 1,100 N/mm² for longer tool life
Taper and deburring countersinker set DIN 335 type C 90° HSS-TiAlN in REPACK by RUKO - 6 pcs.
Countersink set entry-level model for structural steel or steels up to 1,100 N/mm² for longer tool life
Taper and deburring countersinkers DIN 335 type C 90° ASP
Taper and deburring countersinker set DIN 335 type C 90° ASP in steel case
Taper and deburring countersinkers DIN 335 type C 90° HSSE-Co 5
Countersink entry-level model for stainless steel or steels up to 1,100 N/mm²
Taper and deburring countersinker set DIN 335 type C 90° HSSE-Co 5
Countersink set entry-level model for stainless steel or steels up to 1,100 N/mm²
Taper and deburring countersinker set DIN 335 type C 90° HSSE-Co 5 in REPACK by RUKO - 6 pcs.
Countersink set entry-level model for stainless steel or steels up to 1,100 N/mm²
Taper and deburring countersinkers DIN 335 type C 90° - Tungsten carbide
Countersink for Hardox or the most demanding steels
Taper and deburring countersinker set DIN 335 type C 90° tungsten carbide in steel case - 6 pcs.
Countersink set for Hardox or the most demanding steels
Taper and deburring countersinkers DIN 335 type C 90° HSS, with long cylindrical shank
Countersink for structural steel or steels up to 900 N/mm²
Taper and deburring countersinker set DIN 335 type C 90° HSS, with long cylindrical shank in plastic case
Countersink set for structural steel or steels up to 900 N/mm²
Taper and deburring countersinkers DIN 335 type D 90° HSS
Countersink for structural steel or steels up to 900 N/mm²
Taper and deburring countersinker type C 82° HSS, inch size
Countersink for structural steel or steels up to 900 N/mm²
Taper and deburring countersinker set type C 82° HSS, inch size, in plastic case - 5 pcs.
Countersink set for structural steel or steels up to 900 N/mm²
Taper and deburring countersinker DIN 334 type C 60° HSS
Countersink for structural steel or steels up to 900 N/mm²
Taper and deburring countersinker DIN 334 type D 60° HSS
Countersink for structural steel or steels up to 900 N/mm²
Taper and deburring countersinker type C 75° HSS
Countersink for structural steel or steels up to 900 N/mm²
Taper and deburring countersinker type D 75° HSS
Countersink for structural steel or steels up to 900 N/mm²
Taper and deburring countersinker type C 120° HSS
Countersink for structural steel or steels up to 900 N/mm²
Taper and deburring countersinker type D 120° HSS
Countersink for structural steel or steels up to 900 N/mm²
Taper and deburring countersinker type C 90° HSS with one cutting edge
Countersink for structural steel or steels up to 900 N/mm²
Slotted taper and deburring countersinker 90° HSS
Cross-hole countersink for structural steel or steels up to 900 N/mm²
Slotted taper and deburring countersinker set 90° HSS
Cross-hole countersink set for structural steel or steels up to 900 N/mm²
Slotted taper and deburring countersinker 90° HSS-TiN
Cross-hole countersink for structural steel or steels up to 900 N/mm² for longer tool life
Slotted taper and deburring countersinker set 90° HSS-TiN
Cross-hole countersink set for structural steel or steels up to 900 N/mm² for longer tool life
Slotted taper and deburring countersinker 90° HSSE-Co 5
Cross-hole countersink for stainless steel or steels up to 1,100 N/mm²
Slotted taper and deburring countersinker set 90° HSSE-Co 5
Cross-hole countersink set for stainless steel or steels up to 1,100 N/mm²
Taper and deburring countersinker bit 90° "short" HSS
Countersink for structural steel or steels up to 900 N/mm²
Taper and deburring countersinker bit set 90° "short" HSS
Countersink for structural steel or steels up to 900 N/mm²
Taper and deburring countersinker bit 90° "short" HSS-TiN
Countersink for structural steel or steels up to 900 N/mm² for longer tool life
Taper and deburring countersinker bit set 90° "short" HSS-TiN
Countersink set for structural steel or steels up to 900 N/mm² for longer tool life
Taper and deburring countersinker bit 90° "long" HSS
Countersink for structural steel or steels up to 900 N/mm²
Taper and deburring countersinker bit set 90° "long" HSS
Countersink for structural steel or steels up to 900 N/mm²
Taper and deburring countersinker bit 90° "long" HSS-TiN
Countersink for structural steel or steels up to 900 N/mm² for longer tool life
Taper and deburring countersinker bit set 90° "long" HSS-TiN
Countersink set for structural steel or steels up to 900 N/mm² for longer tool life
Flat countersinkers DIN 373 HSS with fixed guide
Flat countersink for structural steel or steels up to 900 N/mm²
Flat countersinker set DIN 373 HSS with straight shank and fixed pilot
Flat countersink set for structural steel or steels up to 900 N/mm²
Flat countersinkers DIN 373 HSS-TiN with fixed guide
Flat countersink for structural steel or steels up to 900 N/mm² for longer tool life
Flat countersinker set DIN 373 HSS-TiN with straight shank and fixed pilot
Flat countersink set for structural steel or steels up to 900 N/mm² for longer tool life
Flat countersinkers HSS with morse taper and fixed guide
Flat countersink for structural steel or steels up to 900 N/mm²
Subland drills "long" type N HSS
Subland drill for structural steel or steels up to 900 N/mm², aluminium
Subland drills "long" type N HSS - 180°
Subland drill for structural steel or steels up to 900 N/mm², aluminium
Subland drills "long" type N HSS - 90°
Subland drill for structural steel or steels up to 900 N/mm², aluminium
Subland drills "short" type N HSS - 90°
Subland drill for structural steel or steels up to 900 N/mm², aluminium
Subland drills "short" type N HSS - 180°
Subland drill for structural steel or steels up to 900 N/mm², aluminium
Subland drills "short" type N HSS - 90°
Subland drill for structural steel or steels up to 900 N/mm², aluminium
Hand deburrer with countersinker
Manual deburring set for structural steel or steels up to 900 N/mm²
Universal handle for countersinker
Manual deburrer handle for holding countersinking tools
Hand tap M 352 HSS, ground - 3 pcs.
Hand tap M DIN 352 HSS, ground
Hand tap M 352 HSSE-Co 5, ground - 3 psc.
Hand tap M IN 352 HSSE-Co 5, ground
Hand tap M 352 HSS-left-handed thread, ground - 3 pcs.
Hand tap M DIN 352 HSS-left-handed thread, ground
Hand tap MF DIN 2181 HSS, ground - 2 pcs.
Hand tap MF DIN 2181 HSS, ground
Hand tap G DIN 5157 HSS, ground - 2 pcs.
Hand tap G DIN 5157 HSS, ground
Hand tap BSW ≈ 352 HSS, ground - 3 psc.
Hand tap BSW ≈ 352 HSS, ground
Hand tap UNC ≈ 352 HSS, ground - 3 psc.
Hand tap UNC ≈ 352 HSS, ground
Hand tap UNF ≈ DIN 2181 HSS, ground - 2 pcs.
Hand tap UNF ≈ DIN 2181 HSS, ground
Single-cut tap M ≈ 352 HSSE-Co 5 ground
Single-cut tap NPT HSS, ground
Single-cut tap G ≈ DIN 5157 HSS, ground
Single-cut taps HSS ground - ProCoil
Extension sleeves DIN 377
Adjustable tap wrench DIN 1814
Ball tap wrenches
Tap wrench with ratchet
Round die M DIN EN 22568 HSS, ground
Round die M DIN EN 22568 HSSE-Co5, ground
Round die M DIN EN 22568 HSS-left-handed thread, ground
Round die MF DIN EN 22568 HSS, ground
Round die G DIN EN 24231 HSS, ground
Round die BSW ≈ DIN EN 22568 HSS, ground
Round die UNC ≈ DIN EN 22568 HSS, ground
Round die UNF ≈ DIN EN 22568 HSS, ground
Hexagonal solid square bolt die M DIN 382 HSS, ground
Hexagonal solid square bolt die G DIN 382 HSS, ground
Die stocks DIN 225
Machine tap M DIN 371 HSS, ground
Machine tap M DIN 371 HSS-TiN, ground
Machine tap M DIN 371 HSSE-Co 5, ground
Machine tap M DIN 371 HSSE-Co 5 VAP, ground
Machine tap M DIN 371 HSSE-Co 5 TiAlN, ground
Machine tap M DIN 371 HSS, ground
Machine tap M DIN 371 HSS-TiN, ground
Machine tap M DIN 371 HSSE-Co 5, ground
Machine tap M DIN 371 HSSE-Co 5 VAP, ground
Machine tap M DIN 371 HSSE-Co 5 TiAlN, ground
Machine tap M DIN 376 HSS, ground
Machine tap M DIN 376 HSS-TiN, ground
Machine tap M DIN 376 HSSE-Co 5, ground
Machine tap M DIN 376 HSSE-Co 5 VAP, ground
Machine tap M DIN 376 HSSE-Co 5 TiAlN, ground
Machine tap M DIN 376 HSS, ground
Machine tap M DIN 376 HSS-TiN, ground
Machine tap M DIN 376 HSSE-Co 5, ground
Machine tap M DIN 376 HSSE-Co 5 VAP, ground
Machine tap M DIN 376 HSSE-Co 5 TiAlN, ground
Machine tap M DIN 371 HSS, ground, with interrupted threads
Machine tap M DIN 376 HSS, ground, with interrupted threads
Machine tap M DIN 371 HSSE-Co 5 TiCN, ground
Machine tap M DIN 376 HSSE-Co 5 TiCN, ground
Machine tap G DIN 5156 HSSE-Co 5, ground
Machine tap G DIN 5156 HSSE-Co 5, ground
Machine tap MF DIN 374 HSSE-Co 5, ground
Machine tap MF DIN 374 HSSE-Co 5, ground
Machine tap UNC DIN 2182 HSSE-Co 5, ground
Machine tap UNC DIN 2182 HSSE-Co 5, ground
Machine tap UNF DIN 2182 HSSE-Co 5, ground
Machine tap UNF DIN 2182 HSSE-Co 5, ground
Machine tap PG HSS, ground
Nut tap M DIN 357 HSS, ground
Forming tap DIN 2174 HSS Co 5-nitrated-VAP, ground
Forming tap DIN 2174 HSS Co 5-TiAlN ground
Combined machine tap bit "short" HSS, ground
Combined machine tap bit "short" HSS-TiN, ground
Combined machine tap bit "long" HSS, ground
Combined machine tap bit "long" HSS-TiN, ground
Magnetic bit holder for ¼” hexagonal shank tools
Machine tap sets HSS - 7 pcs.
Machine tap set HSS in REPACK by RUKO - 7 pcs.
Machine tap set HSS - 14 pcs.
Machine tap set HSS TiN, 7-pieces
Machine tap set HSSE-Co 5, 7-pieces
Machine tap set HSSE-Co 5 in REPACK by RUKO - 7 pcs.
Machine tap set HSSE-Co 5 - 14 pcs.
Machine tap set HSSE-Co 5 - 21 pcs.
Machine tap set HSSE-Co 5 VAP, 7 pieces
Machine tap set HSSE-Co 5 TiAlN, 7-pieces
Machine tap set HSS + ULTIMATECUT twist drills DIN 338 type FLOWSTEP® HSS in plastic case
Machine tap set HSSE-Co 5 + ULTIMATECUT twist drills DIN 338 type FLOWSTEP® HSSE-Co 5 in plastic case
Combined machine tap set "long" HSS in steel case
Combined machine tap set "short" HSS in steel case
Combined machine tap set "long" HSS-TiN in steel case
Combined machine tap set "short" HSS-TiN in steel case
Thread Inserts - 50 pcs.
Pin breaker
Fitting tools
Studs
Extractor nut
Drilling jig
ProCoil Thread repairing set in plastic case
Thread-extractor set in plastic case
Solid drills „Solid 3S“ with weldon shank (3/4"), CBN ground and 3 cutting edges, 30.0 mm
Core drill HSS with weldon shank (3/4"), 30.0 mm
Core drill HSS-TiAlN with weldon shank (3/4"), 30.0 mm
Core drill HSSE-Co 5 with weldon shank (3/4"), 30.0 mm
Core drill with tungsten-carbide cutting edges and Weldon shank (3/4") for railway tracks, 30.0 mm
Core drill with tungsten-carbide cutting edges and Weldon shank (3/4") for railway tracks - Tecrona, 30.0 mm
Core drills HSSE-Co 5 with Quick IN-shank, 35.0 mm
Core drill with tungsten-carbide cutting edges and weldon shank (3/4"), 50.0 mm
Core drill with tungsten-carbide cutting edges and weldon shank (3/4") - Tecrona, 50.0 mm
Core drill with tungsten-carbide and Quick IN-shank, 50.0 mm
Core drill with tungsten-carbide and Quick IN-shank - Tecrona, 50.0 mm
Core drill with tungsten-carbide cutting edges and threaded retainer, 50.0 mm
Core drill with tungsten-carbide cutting edges and threaded retainer - Tecrona, 50,0 mm
Core drill HSS with weldon shank (3/4"), 55.0 mm
Core drill HSS-TiAlN with weldon shank (3/4"), 55.0 mm
Core drill HSSE-Co 5 with weldon shank (3/4"), 55.0 mm
Core drill HSS with weldon shank (3/4"), 110.0 mm
Core drill HSS-TiAlN with weldon shank (3/4"), 110.0 mm
Ejector pin for core drills HSS with Weldon shank (¾")
Ejector pin for core drills HSS / TC with Quick IN-shank
Core drill set HSS with Weldon shank (3/4"), cutting depth 30.0 mm
Set of core drills HSSE-Co 5 with weldon shank (3/4")
Set of core drills with tungsten-carbide cutting edges and Quick IN-shank
Tungsten carbide rotary burr shape A cylinder (ZYA) without end toothing
Tungsten carbide rotary burr shape A cylinder (ZYA) without end toothing - TiCN coating
Tungsten carbide rotary burr shape A cylinder (ZYAS) with end toothing - with aluminium toothing
Tungsten carbide rotary burr shape A cylinder (ZYAS) with end toothing
Tungsten carbide rotary burr shape A cylinder (ZYAS) with end toothing - TiCN coating
Tungsten carbide rotary burr shape C oval (WRC) - with aluminium toothing
Tungsten carbide rotary burr shape C oval (WRC)
Tungsten carbide rotary burr shape C oval (WRC) - TiCN coating
Tungsten carbide rotary burr shape D ball type (KUD) - with aluminium toothing
Tungsten carbide rotary burr shape D ball type (KUD)
Tungsten carbide rotary burr shape D ball type (KUD) - TiCN coating
Tungsten carbide rotary burr shape E tear drop (TRE)
Tungsten carbide rotary burr shape F ball nose tree (RBF) - with aluminium toothing
Tungsten carbide rotary burr shape F ball nose tree (RBF)
Tungsten carbide rotary burr shape F ball nose tree (RBF) - TiCN coating
Tungsten carbide rotary burr shape G tree (SPG) - with aluminium toothing
Tungsten carbide rotary burr shape G tree (SPG)
Tungsten carbide rotary burr shape G tree (SPG) - TiCN coating
Tungsten carbide rotary burr shape H flame (FLH)
Tungsten carbide rotary burr shape J cone 60° (KSJ)
Tungsten carbide rotary burr shape K cone 90° (KSK)
Tungsten carbide rotary burr shape L round cone (KEL) - with aluminium toothing
Tungsten carbide rotary burr shape L round cone (KEL)
Tungsten carbide rotary burr shape M cone (SKM)
Tungsten carbide rotary burr shape M cone (SKM) - TiCN coating
Tungsten carbide rotary burr shape N angle (WKN)
Set of tungsten carbide rotary burrs ALU
Set of tungsten carbide rotary burrs TC
T-shank jig-saw blades HCS
Jigsaw blade RUKO HSS bimetal
T-shank jig-saw blades HSS steel
Jig-saw blades for pneumatic body saws HSS-bi-metal
Reciprocating blades HCS
Reciprocating blades HSS bi-metal
Reciprocating blade tungsten carbide
Hacksaw blade HSS-Co Bihart cobalt
Hacksaw blade HSS bi-flexible
Compact 33 hacksaw frame
Unigrat „Universal Handle”
Unigrat blades
Unigrat steel holder
Rapid deburrer with HSS blade
Double deburrer with HSS disk blades
Tube deburrer with HSS cutting edges
Unigrat set